Super Grab Spray is a great contact adhesive supplied in an aerosol can that is very convenient to use and contains 500ml of low odour clear adhesive. It is waterproof, fast drying and forms an instant bond on the contact of two treated surfaces placed under pressure with high-temperature resistance for long-lasting results!
This multi-purpose spray adhesive is specially formulated for adhering foam, fabric, acoustic panel to MDF, plywood, brick concrete and plaster.
DIRECTIONS FOR USE :
- Read and understand the Safety Data Sheet (SDS) before use, and use appropriate Personal Protective Equipment (PPE).
- This product is designed to be applied to both surfaces to be bonded. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc.
- Shake the aerosol well before use. Always test on your chosen surfaces before use.
- Applying an even coat of adhesive to obtain 80% to 100% coverage of both surfaces. Spray one surface vertically and the other surface horizontally.
- If necessary, spray another coat of adhesive in areas that appear to need more adhesive.
- Leave surfaces for 1 to 2 minutes to allow the adhesive to tack off.
- Press surfaces together with adequate pressure.
Note: No repositioning is possible once the pressure is applied. For best results keep adhesive and surfaces between 16°C-27°C